My Sex Machine Experiences

Jeffrey Earley · 2019-06-06T18:39:07Z

Hi everyone! So I recently got the idea of getting into a sex machine practice alongside my other erotic pursuits like Aneros. After about 4 days of research, I made my decision about which company and device to go with. Now when I was researching, the thing I really wanted to see more than anything was something like this: someone laying out their honest experiences as they had them from day to day, with no sensationalism. As best as I can tell, it doesn't exist! So I felt the urge to put one together so that folks in the future have something to look at from someone who has been there. The Aneros forums feel like a great place for it, because the ideas have a lot of parallels, and I can see many folks potentially being interested in both pursuits. Some background on me: I am a guy in my early 30's, heterosexual, but really into receptive anal sex from women and self-pleasure. I find women's bodies arrousing, and I can also get arroused by a particularly beautiful male or trans-person, But I mainly only relate to women as partners. I also heavily identify with female-style sexuality, and find myself identifying with the woman in an erotic scene more than I do the man. I guess that makes me Hetero-Switch. I am looking for ways to learn to enjoy it even further, and to orgasm more easily from it! Oddly enough, despite liking this kind of play, and having a receptive bottom, the Aneros model which does the most for me is the Eupho. I want these sessions to be sexy for others to read, so I will try my best to keep things that way, while also pointing out the mechanical details, and the icky but important stuff. Feel free to respond with your reflections or tips! If you see something I could be doing better, or have questions, dive right in! I think having a discussion alongside the experience writeups will be great. Here is a video of roughly the model I have, to get a sense for what we are talking about here (what I have is 5% different, but has all of the same parts and features): ---------------------- The Specs: The Machine I chose is from a company called "Hismith" which seems to be based in the US and China, with inventory and manufacturing over there. I am not in any way sponsored by them, so this is the honest writeup of someone who got in on the ground level. My purchase was for 400 USD.You can also find this machine on Amazon. The machine is rugged. The support bars and feet are literally solid steel with no hollow core. Most of the unit is solid steel actually, meaning it weighs about 25 pounds (which is great for stability on the ground when it is excited). It has adjustable stroke distance from 1 to 6 inches. It has between .5 to 240 RPM's of motion. Because the motion is from a flywheel to a driving shaft, the motion also follows a nice smooth sine curve where the end of the stroke and the beginning are slower (which is more comfortable too). It has around 1/12 HP and plenty of torque. The unit has adjustable positioning, so it can point anywhere from 40 degrees downward, to 90 degrees upward, and adjustable height. The level of torque is enough to keep a relentless pace with anal, whether you contract around it or not, but also if something goes wrong, and you are not angled correctly, or it slips, or it hits too much body resistance, the torque is still small enough that the motor stalls and weights for the resistance to go down again. As long as you are lubed, there doesn't seem to be much potential for injury at all, which is perfect. The machine also runs very quietly, which is great for not waking up roommates or family in the wee hours. Importantly with this company, it has a 1-year warranty which they seem to be honoring with all of their users without fuss. Good for peace of mind. From what I can tell, this is pretty much the only machine you want to look at (asside from a few cousin machines that look very similar). The others are too cheap and underperform, and have much less capability. Or they are too expensive, and don't do more. You want something from 350-500 USD, that is the sweet spot, until you want to spend 2000. ---------------------- Session -1 So on the first day of preparation, I didn't use the machine at all. I have done self-dildo-play and pegging-type-stuff in the past, so I already knew the imporantance of preparation, both mental and physical. Like most folks, I have a couple small internal hemmerhoids, that don't normally produce pain or discomfort. I can bear down or contract fully without any sense of pain, so they don't really effect me, except in the sense that I know I should not irritate them too much with rough anal sex. I do a self-flush-out with injected water a few times, clearing rectal passage and colon. I lube up with a slippery water-based lube internally (I normally use coconut oil with Aneros for long-lasting effect, but here I want 0 friction). I pull out my normal anal dildo, which is modeled after a normal penis of typical size, and make it slipper...

Summarize Topic

Page 2 / 2 Prev

Last Post

RSS

newjoytoy

(@newjoytoy)

Member Adventurer

Joined: 7 years ago

Posts: 147

Translate ▼

11/09/2019 11:31 am

I thought once about buying a used Yaskawa Motoman industrial robot and using it as a sex machine.

About $3K and a few hours programming you could have something almost better than another human
and something capable of much, much more than a straight line in-out thrusting motion.

They're pretty stout machines. You'd have to have something solid to mount it to.

ReplyQuote

Jeffrey Earley

(@jlearley)

Member Adventurer

Joined: 6 years ago

Posts: 46

Topic starter

Translate ▼

11/09/2019 3:32 pm

I thought once about buying a used Yaskawa Motoman industrial robot and using it as a sex machine.

About $3K and a few hours programming you could have something almost better than another human
and something capable of much, much more than a straight line in-out thrusting motion.

HEH, I have never seen an industrial robot arm integrated as a sex machine. I would guess that it would be fairly challenging to program a good trajectory to a non-linear cycle, and to balance the speed at which it moved with the force it output into its thrust. I'd worry that at the speed you would want it to move, the corresponding force of the arm would hit like a horse, lol.

ReplyQuote

Page 2 / 2 Prev

Forum Statistics

7 Forums

15.3 K Topics

120.3 K Posts

26 Online

73.2 K Members

Latest Post: Stuck in pleasure... Our newest member: li weird Recent Posts Unread Posts Tags

Forum Icons: Forum contains no unread posts Forum contains unread posts

Topic Icons: Not Replied Replied Active Hot Sticky Unapproved Solved Private Closed