Any Dildo Machine Owners? Anybody tried one?

Beyond the kink, it's just a pleasure machine, like a vibrator.


What you need to know :
- If you buy one, it will be expensive and the quality might not be… (the link you provided show the best commercially available, never tried it.)
- Most are hand made, it's not that expensive, however you might have to know about basic electronics (theorie + soldering), electricity and maybe carpentry.
- The hard part is finding a suitable motor, most electric motor just have no torque at low rpm or are so reduced that you won't have speed.


I tried to make one but since I can't afford a good engine, it's really slow.


"I find that the suction cup dildo approach is sort of difficult to maintain continuous and consistent thrust"
The machine won't let you down here, it will relentlessly do it's job, however it will be kind of noisy.


Moreover, if you want variation and randomness in the stroke it's a no go, it might be doable, either with a servo, of some fun mechanical system, never seen it done thought.

I have though of this and just not had the time to make it yet. The motor you want is a windshield wiper motor and controler. Motor is powerful not too noisy and you can play with it without killing yourself with high voltage. Just pull one out of a old car and the controller off the steering column. Thes rest can be made of wood or metal depending on your skill.

That is what I currently use, with a computer power unit for my 12VDC. These motor a great for many use, but it's not efficient enough for this purpose. I have 230V motor, but being not mechanically reduced, it doesn't offer enough torque at low rpm. I even tried a drill, at low rpm the motor overheat really fast.

Most commercially available motor in my country are pricey and overkill, 2 Horse power engine is a lot, but I'd like to try em. Washing machine motor might also do the trick, however to have a correct rpm regulation is kinda hard with permanent capacitor motor.

What I do with my dildo is leave it in place while lying on my back. It feels great after a while stretching my anus and filling me up. I move my hips occasionally to massage my prostate or find other erotic places. If I'm feeling energetic, I do gentle squats on the floor or bed. I like the control of my movements and the discovery of new sensations. I don't think I would like a machine doing this for me.

I've heard of the Venus by Sybian though if you have unlimited money. It's supposed to be amazing: http://venusformen.com

Here is a product for $295. I have not purchased or tried this. I am thinking about building my own soon. $300 is pretty cheap considering the cost to buy all the parts. If you are good in the build department you could part it all out yourself and make it for closer to $150.

http://www.forttroff.com/product/81000.html


DIY info:


http://www.machineyourself.com/#!motors/c15ny


http://www.orgasmalley.com/diyparts.htm

Good info @Hellyes.@Luxxy "it's not efficient enough for this purpose" Not sure what you mean.
If you mean powerful enough then it might be the power supply not being able to deliver enough amps so you loose punch from the motor.

Something that's become more apparent to me in light of this recent fascination is how important the mental aspect of a session really can be. After watching that video on youtube of the demo of the machine it really turned me on. I was super aroused when I slipped my Progasm in for a session and had some amazing feelings and sensations.

I'll be making sure to work on my arousal prior to my sessions from now on.

Here is a product for $295. I have not purchased or tried this. I am thinking about building my own soon. $300 is pretty cheap considering the cost to buy all the parts. If you are good in the build department you could part it all out yourself and make it for closer to $150.

http://www.forttroff.com/product/81000.html

You can find the same machine on aliexpress for around $100

Here is a product for $295. I have not purchased or tried this. I am thinking about building my own soon. $300 is pretty cheap considering the cost to buy all the parts. If you are good in the build department you could part it all out yourself and make it for closer to $150.

http://www.forttroff.com/product/81000.html

You can find the same machine on aliexpress for around $100

B*stard Americans! anywhere selling such a thing in the UK that isn't £400 odd?

Here is a product for $295. I have not purchased or tried this. I am thinking about building my own soon. $300 is pretty cheap considering the cost to buy all the parts. If you are good in the build department you could part it all out yourself and make it for closer to $150.

http://www.forttroff.com/product/81000.html

You can find the same machine on aliexpress for around $100

Dang. I bought this machine (from same site as musicmaker86 mentioned) for over $400 (shipping is expensive!). The machine is currently on it's way.

@awakeprostate - you'll have to fill us in on how it works.

Frankly all those other machines on the aliexpress site don't look like what I'm interested in. I don't see any way to adjust stroke length. $400 might seem like a lot but compared to some machines that are upwards of $1200-1500 i'd say its not too bad.

The other thing I like about the Dau Huan machine is that it can be disassembled for inconspicuous storage. If you want to be discrete about your possessions at least if you took this one apart it would be difficult to determine its exact function - should anyone happen to discover it accidentally. The other ones from Fort Triff seem a little too obvious - given that some of them say "sex machine" right on the side.

Here is a product for $295. I have not purchased or tried this. I am thinking about building my own soon. $300 is pretty cheap considering the cost to buy all the parts. If you are good in the build department you could part it all out yourself and make it for closer to $150.

http://www.forttroff.com/product/81000.html

You can find the same machine on aliexpress for around $100

Dang. I bought this machine (from same site as musicmaker86 mentioned) for over $400 (shipping is expensive!). The machine is currently on it's way.

awakeprostate the machine you order looks to be much better quality than the aliexpress machines I linked to, i would not worry about it. 😉

Don't mean to be a party pooper, but i have trouble believing that any of these machines will be worth the money, or effective. My guess is that it will be like a vibrator: the systematic unchanging motion will be numbing.

If they were programmed to vary the stroke, then maybe.

I'll be fascinated to hear the results.

But I'd bet on them being a far cry from the aneros or similar self-driven devices.

Maybe on really slow motion it would be good? Just a hint of motion as a compliment to your own muscles' action?

Darwin

Don't mean to be a party pooper, but i have trouble believing that any of these machines will be worth the money, or effective. My guess is that it will be like a vibrator: the systematic unchanging motion will be numbing.

If they were programmed to vary the stroke, then maybe.

I'll be fascinated to hear the results.

But I'd bet on them being a far cry from the aneros or similar self-driven devices.

Maybe on really slow motion it would be good? Just a hint of motion as a compliment to your own muscles' action?

Darwin

Probably not, BUT variety is the spice of life! 😉
Plus, some enjoy the idea of being fucked...if you are hetro and the wife/gf won't do it then fuck machines are the next best possible option.

Well dunno about everyone else but the machine now in question looks exactly like a windshield motor.Its small a simple and fully adjustable. Looks great! If you have the money.
I dont but i have an old car with a similar motor.
Let us know ho it goes, I say its a good buy. The parts are most likely no more than $50 worth but then purchase price can very so much with middle man factors.

When your home made dildo machine goes horribly wrong!

Well... A 1.50 meter stroke can't be safe, that's for sure.

Edit: I could really see topgear doing something like that with a V8.

remove

@inhope Bastard Americans?????? What a stupid, jingoistic comment. No wonder people are reluctant to respond to your repeated requests for help.

Dude it was a bit of light humour, not meant to be taken seriously. Also people have responded to my requests for help just fine, had some really helpful and insightful messages in my inbox as well as on the forums.

Thank you for your thoughts though.

Can't resist:

Update:

I've used my new machine + dildo attachment twice so far. It's fantastic. The machine is solid, and easily outlasted me during both hour-long sessions.

The biggest advantage of the machine is its untiring motion with zero effort on my part. Even though the machine's motion is unchanging, the sensations are far from it. For example, anal contraction is immensely pleasurable (e.g. switching between completely relaxing my ass, pushing outward, contracting a little and contracting hard). Also, I tend to rock my body with the machine giving me new changing sensations.

The cost is still steep. I can't deny that. Unlike other toys, it probably won't pay for itself in a single use. Regardless, I'm happy with my investment given how many hours of enjoyment it has in store.

hmm this sounds pretty delicious
I wish I could spend some big dough on a machine that could fuck me I would just be a hermit and never go out

The Venus would be great if you are willing to plunk down the cash for it

One solution to the problem of monotonous, mechanical motion is to go simple - as in, "high school physics" simple machines. The LoveArc, which seems to be getting positive reviews, is essentially a long, curved lever on which a toy can be suction-cupped. The user is able to control the pace and depth of each thrust by varying the pressure applied to the handle end.

David at the Big Gay Review took it for a spin and was quite taken with the device: http://thebiggayreview.com/2015/06/17/review-lovearc-self-propelled-sex-machine/

It also compares pretty favorably, cost-wise, does not have a drive mechanism that needs maintenance, does not require power, and is pretty unobtrusive for hiding in plain sight (at least compared to your garden variety sex machine).

I don't have personal experience with the LoveArc, but it's a tempting upgrade! (See especially the part about see-sawing with a partner.)

How about those Love Rocker devices? They look like a short, backless glider rocker with a dildo that comes up and down through a slit in the seat. They have a "joystick" grab handle to help you keep things controlled, and probably, to keep you from falling off. I've read women's reviews of it that were quite positive. One woman's husband built her one.

One solution to the problem of monotonous, mechanical motion is to go simple - as in, "high school physics" simple machines. The LoveArc, which seems to be getting positive reviews, is essentially a long, curved lever on which a toy can be suction-cupped. The user is able to control the pace and depth of each thrust by varying the pressure applied to the handle end.

David at the Big Gay Review took it for a spin and was quite taken with the device: http://thebiggayreview.com/2015/06/17/review-lovearc-self-propelled-sex-machine/

It also compares pretty favorably, cost-wise, does not have a drive mechanism that needs maintenance, does not require power, and is pretty unobtrusive for hiding in plain sight (at least compared to your garden variety sex machine).

I don't have personal experience with the LoveArc, but it's a tempting upgrade! (See especially the part about see-sawing with a partner.)

That is GENIUS!!
I'm not that happy with my fleshlight currently, but I think if I would hook it up to the Lovearc and a buttplug it would be fantastic!

It just occured to me what the love arc is made out of.Its a leas spring from the rear of a older car or truck. Its the main one with bent bits at the end to put bolts through.
You could pull one apart clean it up spray it with paint the stick some broom handle wood through the ends for the handle bars. job done.

I have check it out! Mine in action on me https://www.pornhub.com/view_video.php?viewkey=ph5af7e3bfdbbe3

Musicmaker-

I've wondered the same thing for the same reasons- simple automatic pleasure, no kink. My sensual journeys usually start in the garage...we guys like our power tools, right?

I've been considering a couple of mods for cordless tools:

1. An articulating bit for a screwdriver or drill, $11. It flexes almost into a circle. I've been thinking of cannibalizing a cheap silicone plug or dildo, and molding it onto a screw bit. Drill out a hole in the plug, snugly tap and cement a permanent female plastic piece into it, cement a bit into that, and presto! A rotating thingamabob that I don't have be a contortionist to use. Also, if I design the thing a bit off-center, it might make elliptical contact with my prostate, and I could control the speed. The thought of something pulsing in orbit past my prostate makes me tingle.

2. Same concept, but with a jigsaw. But how to hold it down there? Adapt a u-bolt and extension to the jigsaw, permanently bond your toy of choice to the bottom curve, and whatever you affix to the business end goes in and out, again at your pace.

Tools required: small but quality tools, smart precautions (no edges, no coming apart) lotsa lube, and a bit of patience. If I try it, I'll share.