Syn Models Go In To...
 
Notifications
Clear all

Syn Models Go In Too Far


Avatar for Author
(@mrsuperhate)
New Member Customer
Joined: 1 year ago
Posts: 2
Topic starter  

I've had this issue with the MGX Syn, Maximus Syn and also the MGX Trident. It seems that the flexible silicone tabs make the Syn models slip all the way in every time. In the case of the MGX the p-tab on the Trident model seems slightly shorter causing the same issue. The aggressive shape of the MGX is actually painful for me as it always goes all the way in no matter what, so there's no comfortable way for me to even use them. 

I can at least still use the Maximus Syn but I get less out of it than I otherwise would. The Helix Trident Syn works as it should for the most part but still gets pulled in all the way during particularly strong contractions. 

Have you guys noticed this problem too? 


   
Quote
Avatar for Author
(@poptrek)
Trusted Member Customer
Joined: 1 year ago
Posts: 47
 

First, anything that is uncomfortable or painful stop something isn't right.

The MGX for me causes discomfort around the anus from the ridges. I would say it's the least aggressive on pushing on your prostate. It is supposed to go all the way in minus a little bit(Your prostate is around 4 inches deep that's why using your fingers general doesn't work unless you going to for an anal orgasm). I use a njoy wand and I can push pretty hard(More than any Aneros product) before any discomfort sets in. I even got the high roller from Lovehoney(The tip rotates) and this pushes harder than the njoy and it was the first toy to milk me. I would say something ain't right internally, your not using enough lube, or your not turned on enough(I have some vibrators that are too strong at the start and will be painful at full tilt until I am closer to orgasming). 


   
Fred27 reacted
ReplyQuote
Avatar for Author
(@mrsuperhate)
New Member Customer
Joined: 1 year ago
Posts: 2
Topic starter  

@poptrek I guess I should have said that I've been at this for nearly 10 years. I had an older account on this forum but it was lost when they screwed up this website. I assure you, nothing is wrong internally LOL.

In regards to the MGX hurting, I own almost every single model including the originals. The old MGX works fine because it stays where it's supposed to. The new MGX models hurt because of the way the tip is shaped combined with them going in too far, causing me an uncomfortable pressure. But that wasn't the point of my post to talk about, guess I should have left that part out.

I just got done a session tonight with my Helix Trident Syn. At some point it got sucked all the way in which I didn't notice. It meant that the end of the session didn't feel great. Something like that never happened with the old Helix models. Having to worry about checking to make sure it hasn't gone in too far is rather distracting and annoying.

Before anyone says anything yes I know I could use a different model instead.

This post was modified 1 year ago by MrSuperhate

   
ReplyQuote
Fred27
(@fred27)
Member Adventurer
Joined: 4 years ago
Posts: 271
 

Have you learned to totally relax before inserting anything? After your years of experience, I would hope so! With lots of lube and being relaxed, no pain should be experienced, only pleasure!


   
ReplyQuote
SupaOkami
(@supaokami)
Trusted Member Customer
Joined: 3 years ago
Posts: 31
 

Sounds like the extra depth is causing the MGX to overshoot your prostate and press on your seminal glands. I actually also had this issue and posted in detail about my findings here https://community.aneros.com/forum/postid/122393/

Hope that helps you!


   
ReplyQuote
Share:
Skip to toolbar