Progasm Problem-gctid5143

Bama,

Send another email or better yet, call the company on Monday. Just curious, how did this occur?

BF Mayfield

you could drill a small hole in the ball at the k tab and another where the abutement arm would have joined the body "some prep like removing the arm and sanding any rough edges might be in order" then use a small piece of steel wire to replace the arm and glue both ends with evostick or some other bulky glue or resin

I had the same thing happen to my white progasm - it looked like it has stress fractures in both tabs, and one broke right off. And no, I wasn't using it incorrectly/putting stress on it.

I thought, "Well, I could try to crazy glue it", as that stuff sort of melts plastic. It ended up working great.

I wasn't worried about using a glue/chemical as the tab doesn't enter me - it stays on the outside.

you could try that out.

It is a white progasm and NO it was not dropped. And just like Iceman99 it looks like it has stress fractures before it broke off. I tried super glue to no avail. Kind of confused why it broke and only 4 months old. I have been using the "don't do anything except relax" with the progasm. I also have a MGX and Helix that I use and they get worked harder than the progasm. Will try to contact them again next week......

Finally contacted Aneros support and they are going to replace the Progasm free of charge. Just had to mail in the tabs. Thanks!!