Non aneros products?

@Ehm I do take breaks, but but not to re-lube. When the sleeve gets too intense I pull out, wipe off, and do slow hand edging for an hour or two (or less, depending) before I go back for another round with the sleeve. These days I use anhydrous Lanolin as lube. It's pretty thick starting out, but once you warm it up and work it a bit it's awesome. Especially for the second and third round. What's already in there is usually perfect. I only re-lube the tube every other round after that. ...A mix of Lanolin and Shea butter is the absolute best, but I think the Shea butter breaks down the material. But, Lanolin mixes with everything, so you can try any lube combo with it. The TOMAX masturbators are alot better quality than Fleshlight. I actually put a hole in the end of mine and insert a little hose to eliminate the suction. I'm not sure how long Fleshlight masturbators last, but the TOMAX ones last for months before they break down (start splitting when you turn it inside-out to wash it). ...Lanolin does make them shrink a little over time though, which is weird. ...And, now that I'm thinking about it, I probably spend alot more than 5 hours fucking the thing on marathon days lol. Just not all at once 😉

It's making me horny just thinking about using one of those, when in the multi orgasmic zone you could probably fuck all night and then some if it stayed lubricated, what's the sound like?

@Ehm That's the way I am by hand, but I just can't go forever, or reach the penis based super-O level in a masturbator like that. It sure is fun trying though. ...Anyways, the sound level with Lanolin isn't bad. Pretty quiet, for me. And you'll never end up with chafing. It always leaves the skin nice and soft, and in just as good a condition physically as when you started. No scaly residue buildup either.

Thanks for the recommendation, I really need something to ram my dick into these days

What lanolin product do you buy?

And also, the same for shea butter.

Hi @mtgoat I've been getting my lanolin from a seller on eBay called Rocky Mountain Oils Company. http://www.ebay.com/usr/rocky_mountain_oils_co They have a great product, and they ship fast, but they don't answer emails. I asked different sellers to find out what Lanolin oil smells like, because I bought some from a local organic market that didn't smell anything like regular anhydrous Lanolin (the oil had a strong chemicall/vynel smell). ...I never did get a good answer from anybody so I steer clear of Lanolin oil now.

I bought 5 lbs of raw Shea butter over a year ago. No brand. I just did my research so I knew what the look, feel, and smell was supposed to be. Then found a seller on ebay with a good reputation and read a couple hundred feedback responses before buying. The stuff I got is great. I even use it to oil my cutting board. And I've only used about 1/4 of it.

BTW, a mix of 2/3 or a little more Lanolin, with 1/3 Shea butter, makes a perfect, super creamy and luxurious lube for Aneros sessions 😉 ...Some people might disagree with the safety of using Lanolin rectally, but I haven't experienced any ill effects yet.

Wandering smoke, do you inject the lube into the rectum with a shooter? Do you ever use silicone lube? I’ll try shea butter and lanolin.

Had a great session with my curved njoy wand. One of the best anal workouts ever. Only second time Ive used it. Im going to try a Don Wand Bent Graduate Glass Pleasure Wand from Amazon for $9. 511 reviews, 4.3 rating out of 5. For $9 its worth a try.

@mtgoat I actually use a 10ml glass sampler syringe. The nozzle on those is meant for a hose instead of a needle, so it has a larger inner and outer diameter. And the nozzle is almost an inch and a half long, which for me is perfect. ...I can't seem to post pics on the forums, so try this.

I don't use silicon lube. Only natural ingredients for my ass 😉

@stimlover, any recommendations for the prostate electrode? I am planning on getting the 312 box but havent seen any good reviews on prostate electrodes. Thanks.

@orgazmo @stimlover I have both the Ultima 5 and Flick Duo They both feel prickly on the genitals, but I like the anal probes, it is like having automatic involuntaries. In fact, I was having an anero dry spell about a year ago and it was the estim that reignited my feelings.

I have always wondered if the ET-232 or the ET 312b would feel that much different on genital stim. I would hate to spend that much and find out it was the same sensation.


I have this Prostate Massager for eStim:


http://www.happystim-usa.com/catalog/i662.html


It is much like the Progasm and I have come close to having a GIANT orgasm with it.


I have this one too:


http://www.happystim-usa.com/catalog/i518.html


It is really big, if you warm up and get relaxed it can feel really good on the prostate.


Also, I found with the Ultima 5, the sensation on the prostate is a swirling motion, with the flick duo it is a rocking motion like when you do contractions with an Aneros.


Never tried one of these:


http://www.happystim-usa.com/catalog/i170.html


But have read that they pump in and out.

I also find that lower power settings work best for the Prostate. For me a tickle is better than a vigorous massage of the area.

@ineverknew would love to hear your experience with the 312b

@xtimedt69 I think I've decided on purchasing the ET232 kit from happystim-usa. It comes with the bipolar Zeus Surge prostate massager electrode ( http://www.happystim-usa.com/catalog/i618.html) as well as 2 chokers. Originally, I was looking at the Ultima 5 because it was a lot cheaper, but I was concerned about battery life (no AC Adapter) and being able to have enough power to run both channels. Any opinions on those issues?

Any opinions on the Zeus Surge? To be honest, I like the design of the prostate electrodes you linked better, but I'm trying to keep my cost as reasonable as possible by staying within the kit.

These prostate electrodes look amazing, but $$$$$:
http://www.happystim-usa.com/catalog/i544.html
http://www.happystim-usa.com/catalog/i480.html

@xtimedt69 I think I've decided on purchasing the ET232 kit from happystim-usa. It comes with the bipolar Zeus Surge prostate massager electrode ( http://www.happystim-usa.com/catalog/i618.html) as well as 2 chokers. Originally, I was looking at the Ultima 5 because it was a lot cheaper, but I was concerned about battery life (no AC Adapter) and being able to have enough power to run both channels. Any opinions on those issues?

Any opinions on the Zeus Surge? To be honest, I like the design of the prostate electrodes you linked better, but I'm trying to keep my cost as reasonable as possible by staying within the kit.

These prostate electrodes look amazing, but $$$$$:
http://www.happystim-usa.com/catalog/i544.html
http://www.happystim-usa.com/catalog/i480.html

Ebay

@orgazmo the ultima 5 had plenty of power and I didn't change batteries that much, I don't think I ever turned it up past 50%. But if he ET232 is in your budget I would gt that it is made more for the kind of stimming you are looking for.

Ebay

I've looked, but there isn't much of what I'm looking for.
@orgazmo the ultima 5 had plenty of power and I didn't change batteries that much, I don't think I ever turned it up past 50%. But if he ET232 is in your budget I would gt that it is made more for the kind of stimming you are looking for.

Did you run both channels at once with bipolar attachments on them? Some on smartstim said they had trouble powering probes with large electrodes.

@xtimedt69, I havent purchased it yet. Still researching on the best prostate electrode. But I'll be sure and update you when I do.

@ineverknow Which ones are you looking at? I can't decide if I want to go with just the kit that comes with the Zeus Surge, or get the basic package and purchase one separately. Really want to try the Folsom one, but it's $150. I may end up just converting one of my Aneros into an electrode.

@ineverknew Problem is you won't have any benchmark until you try something! :bz

My first one was my progasm with copper tape added to it. Somebody posted instructions here once. I found it very difficult to get the tape smooth enough and seal the edges well enough. But is demonstrated the possibility because it actually massaged pretty well.

@orgazmo, I havent seen many. I was looking at the surge or the twisting tom. both look like they are shaped sort of like an aneros device which I think would be beneficial compared to just a plug shaped device.

@xtimedt69, very true. You have to start somewhere. I dont like the idea of making one of my devices into a electrode with copper tape. While I'm pretty handy that doesnt seem safe lol.

@ikneverknew I learned how to modify the progasm from @alex_xxx he did a superb Job. Mine was never a smooth as his was. The electrasim noir is kind of lik progasm, it feels really good.

I'm looking at something called InstaMorph on Amazon. You basically just heat it in water then shape it however you desire. My preliminary plan is to make a mold of one of the toys I already have, then embed the wiring and copper sheet metal into the Instamorph. I'd prefer using copper sheet metal over the copper tape because it probably is more durable and I won't have to use finger nail polish to cover the seams. My goal is a seamless toy. Of course, I will have to shape the coppers edges to where they can embed into the plastic and also solder the wire connections beforehand into the copper sheet. Probably a bit ambitious on my part for my first project, but seems doable if I practice a few things beforehand.

I wish the Electrastim Noir or the Twisting Tom was available in the ET232 package instead of the Zeus Surge. I'm leaning towards getting the small Folsom Acrylic, which isn't small at all. 5" insertable and 1.5" width. The PES Stanley Junior is even bigger at 1.75" width. I believe the Progasm is 1.25" at it's widest. I'll see how I handle that extra 1/4" before I get anything larger than that lol. It appears the size descriptions are a bit of a misnomer in the estim industry.

@orgazmo If you figure out how to mold a copy of your aneros out of that InstaMorph you need to document it.

@xtimedt69 Making an exact replica will be a more challenging way to say the least and I'm not sure if it would be possible with Instamorph. I'm thinking about possibly using some kind of food grade acrylic resin as well. It probably would be easier to use something that isn't quite as viscous as Instamorph. I also wouldn't want to step on any patent toes 🙂 so I may make my own design in case it was good enough to sell if I ever wanted to. The problem seems to me would be putting the two halves of the mold together and being able to inject the plastic/acrylic in there while also keeping the wires and electrodes properly positioned.

I'll definitely post a guide and pics if it turns out well. It will probably be awhile before I have the time to start on it though. It sounds like it would be a really fun project though so I'm going to keep researching.

@orgazmo I couldn't see ho you could make that into a mold then ... I remembered ....

http://cloneawilly.com/


It has the stuff to make the negative mold ...

I recently purchased a l'amourose rosa, well worth it. It has gotten me closer to a super o than anything else to date. The vibrations are sublime, I just wish I could turn it up a little higher.

This is the Evolved You Too Black. Very cost effective. Vibrates (many selections similar to the Vice) Very reasonable. Around $20.00. Stays in place well too. Bendable.

Someone (ELM) wrote that they could use a sleeve for 5 hours of fucking? And it is still lubricated?

Are you uncircumcised? Because a circumcised penis would dry out a sleeve (or vagina) without continual lubrication (or vaginal wetness).