Notifications
Clear all
Topic starter
04/06/2023 11:38 pm
I want to share with you my experience of my modified MGX by myself.
Firstly I hollowed the upper back side of my MGX. Then I inserted into the hole a small vibromotor that is from old cell phone. Next, I connected a thin electric wire to the vibromotor and hided the wire inside MGX. Finally I closed the hole and wire trace using hot glue and connected the other end of the wire to 4.5V voltage battery. Also I connected a on/off button to control the vibromotor.
When I have a session, I occasionally do shortly open/close the button to make a short pulse wave in my rectum or prostate. It makes amazing stimulation on my rectum or my prostate. When I sense that I am in a plateau, I do shortly open/close the button and calm down in the Do-nothing mood and wait to come another new waves of pleasure.
During a session I found that I should push the button for short time. If the button is pushed continously, it makes continously vibrating and to cause desensitization on prostate. The important key of this method is create a shortly pulse wave to re-stimulate prostate when I feel any recession or some plateau phase. So, I am able to make more many times of orgasm peaks, longer intensive pleasurable session.
Look forward any opinion. Good vibes to you.
/Excuse me for my bad English/
lanoix reacted
04/08/2023 2:26 am
Hey that sounds like a great idea. The only thing I would be slightly wary of is the composition of hot glue, there seems to be a lot of different stuff in there.
If you are handy with electronics, you could add an intensity control, and/or a pulsing feature. Better still, a micro-controller programmed for multiple patterns!
Topic starter
04/10/2023 8:13 am
Dear Lanoix, Thank you for your opinion. I think that a microcontroller or wireless connection will be great, but it will very complicated. A bit of slight vibration on the near to prostate is enough to re-stimulate the prostate. I am a do-nothing guy and over stimulation is too distractor for my prostate.
Topic starter
10/06/2023 11:26 am
Hello, Dear aneros friends. Here I want to share some picture of my handmade toys. These toys are made metal wire structure for their shapes and durability. Then I used some hot glue for latest originally aneros toy shapes and their smooth surfaces. Finally I mounted old mobile phone vibromotors into inside of them. Also I mounter thin electric wires, on/off push button and battery for short vibrating pulses during a session. I know my toys seem not beautiful as you see. But their are absolutely functionally. I am able to get amazing senses, So's using them. I hope you to get some new ideas for modification of your aneros toys. Good vibes to you. / I apologize to my English/
This post was modified 1 year ago 2 times by frekans
Topic starter
10/06/2023 11:38 am
/I could not attached more pictures to this post/
10/06/2023 1:01 pm
I'm always interested to see these projects, I've dabbled with adding vibration myself, but not to the point of hollowing out any of my devices.
There was another thread posted here recently you might find interesting:
https://community.aneros.com/forum/general-discussion/diy-vibration-aneros/
frekans reacted
Forum Statistics
7
Forums
15.1 K
Topics
119.4 K
Posts
9
Online
72.6 K
Members
Latest Post: This guy! Our newest member: TheDudeGuy123 Recent Posts Unread Posts
