Have problem with natural jelly lubricant

Aneroshole, I have several suggestions for you. First, use the double boiler technique, that is, use two pans, one which will fit inside the other, the larger pan will get some water then use the smaller pan to mix your ingredients. Using a stove (not a microwave oven), bring the water in the larger pan to a boil then put the smaller pan to set inside in the boiling water. Second, completely melt the beeswax in the inner pan prior to adding the coconut oil, after it is melted then add the coconut oil, It is important that you slowly stir this mixture until you are sure the mixture is well integrated and the resulting liquid is uniformly transparent. After it is adequately mixed turn off the stove and remove the mix pan from the boiling pan and allow to cool (you can accelerate the cooling by putting this pan in a larger pan of cold or ice water, but be sure to stir occasionally to maintain a homogeneous mixture).
Good Vibes to You !

Thanks I try it out

@Aneroshole, how did it turn out?

I don't plan do it right now

plan do it in future. U may try it for me, and tell you results here 😀

Hello, then I mix coconut oil with beeswax I got texture like this - = beeswax not fully melt with coconut oil. Then I heat it in microwave - it have nothinh , but then it get cold - I have this problem.

Hope you understand.

Thanks! It works!