Three weird things about the MGX last night

Try to sand it with extra fine sand paper, or sand paper designed for plastic, it could be rough!

Honestly I use a putty form of silicone that is for your kitchen sink pipes and is EPA safe for drinking water. It is easy to mold and form into whatever you want. I used some on my MGX, Eupho and an off brand massager and made them into a flat shape, so that it's not like the tab (a small, "pointed" piece of plastic contacting and sticking/stabbing you when in the throes of autofuck euphoria) but like a flat shape that is about half an inch wide and rounded on all sides. I just ball up two little balls of the putty and mold them to each side of the P-tab and keep adding until it's what I want. It sets for a long time and is 100% waterproof and completely irritation-free. I've used these toys like this for over 2 years now and never once has there been irritation. The silicone is completely inert.

This makes it SO MUCH MORE COMFORTABLE and there is still plenty of "push" against my perineum to feel some nice sensations and pressure. The biggest thing is that it anchors the toy from sliding to either side of the massive ridge of tissue that runs from the bottom of my balls to my ass (my perineum isn't a divot or small depression like the textbooks say, it's actually the extreme base of my cock and I'm kinda on the larger side so it gets swollen as I get excited and blood flow starts, and the tab goes to one side or the other and then it's not centered and then I don't have orgasms like I really can!). Anyway, so many benefits to making the p-tab more stable and also more comfortable.

Try to sand it with extra fine sand paper, or sand paper designed for plastic, it could be rough!

Honestly I use a putty form of silicone that is for your kitchen sink pipes and is EPA safe for drinking water. It is easy to mold and form into whatever you want. I used some on my MGX, Eupho and an off brand massager and made them into a flat shape, so that it's not like the tab (a small, "pointed" piece of plastic contacting and sticking/stabbing you when in the throes of autofuck euphoria) but like a flat shape that is about half an inch wide and rounded on all sides. I just ball up two little balls of the putty and mold them to each side of the P-tab and keep adding until it's what I want. It sets for a long time and is 100% waterproof and completely irritation-free. I've used these toys like this for over 2 years now and never once has there been irritation. The silicone is completely inert.

This makes it SO MUCH MORE COMFORTABLE and there is still plenty of "push" against my perineum to feel some nice sensations and pressure. The biggest thing is that it anchors the toy from sliding to either side of the massive ridge of tissue that runs from the bottom of my balls to my ass (my perineum isn't a divot or small depression like the textbooks say, it's actually the extreme base of my cock and I'm kinda on the larger side so it gets swollen as I get excited and blood flow starts, and the tab goes to one side or the other and then it's not centered and then I don't have orgasms like I really can!). Anyway, so many benefits to making the p-tab more stable and also more comfortable.

Could you link us to some examples of this silicone you use? I need this for myself.

would you also be able to post a few pics of your device with the stuff on it as well? Just curious to see how it looks!

thanks!

Yeah, some examples of the silicone would be very welcome and useful.

I'm using a drop of hot glue as of late and then spread it a bit so the layer is not that thick. It hurts a bit when I take it off because it really sticks to the skin but it stays put real nice. The texture is a bit like rubber and you can just peel it off with fingernails if it doesn't work out. A bit of a ghetto solution but you could try it if you own a glue gun.

That silicone putty sounds like a better deal for comfort though. The glue is mostly a texture for it to really anchor itself and stay put. It doesn't provide much cushioning.

Can anyone post a link to the silicone putty? Amazon perhaps? I'm finding some odd stuff when I google and I don't think it's the right stuff. Thanks

I just got some teat things that you out on bottles of milk and let babies suckle. I think if I mod it and cut off the excess, it might fit over the p-tab. Don't know if will provide adequate cushoning....

The bulb off a medicine dropper might work. When I was starting out a folded piece of tissue ("facial", ie. nose, not bog roll) between the p-tab and my perineum helped me be more comfortable.

Try to sand it with extra fine sand paper, or sand paper designed for plastic, it could be rough!

Honestly I use a putty form of silicone that is for your kitchen sink pipes and is EPA safe for drinking water. It is easy to mold and form into whatever you want. I used some on my MGX, Eupho and an off brand massager and made them into a flat shape, so that it's not like the tab (a small, "pointed" piece of plastic contacting and sticking/stabbing you when in the throes of autofuck euphoria) but like a flat shape that is about half an inch wide and rounded on all sides. I just ball up two little balls of the putty and mold them to each side of the P-tab and keep adding until it's what I want. It sets for a long time and is 100% waterproof and completely irritation-free. I've used these toys like this for over 2 years now and never once has there been irritation. The silicone is completely inert.

This makes it SO MUCH MORE COMFORTABLE and there is still plenty of "push" against my perineum to feel some nice sensations and pressure. The biggest thing is that it anchors the toy from sliding to either side of the massive ridge of tissue that runs from the bottom of my balls to my ass (my perineum isn't a divot or small depression like the textbooks say, it's actually the extreme base of my cock and I'm kinda on the larger side so it gets swollen as I get excited and blood flow starts, and the tab goes to one side or the other and then it's not centered and then I don't have orgasms like I really can!). Anyway, so many benefits to making the p-tab more stable and also more comfortable.

Hey guys, thanks for the interest! I'll post a pic very soon, I have some but need to find them. The putty I got from a Lowe's I think, in the kitchen plumbing related stuff. I was hunting for kitchen or FDA approved silicone cuz I wanted to experiment making a sex toy, and I saw the putty. It comes in a tube the diameter of a 25 cent piece or so, and it's gray. It's super super easy to use: you open the tube, it's in there in a tube shape, you rip or cut off the amount you want, you stick it on what you want, you mold it to what you want it to be, and then prop it up so that nothing touches it as it sets. I think 8 hours was the cure time, I let it go 36-48 hours just to be extra OCD on it. This stuff is made to fix the pipes in your kitchen that you drink water from. That said, they recommend for it to not make long contact with your skin. But the average session for me is like an hour and I don't have it on every toy, so I don't cover it up. If you're worried about it, you could put tape on it or like anything that you feel won't irritate your skin. But that's all it can do, just irritate your skin. It has never ever once come close to that on me. Once it's totally dry and set you can sand it and smooth it out and reshape it to your liking.

On the P-tab I just made sure that the putty completely encircled the tab. I'm not sure this is needed, but it secures it in place even more to prevent it from ever coming loose. But I don't think that could happen. I can have super Os from toys that don't have this P-tab modification, but I didn't really have them consistently until I modified.

Something else you can try to make a P-Tab modifier, is use some Thermoplastic. I just got some Thermomorph Moldable Plastic Pellets from Amazon. COOL stuff to play with and use for all kinds of projects and.... heheh, making your own toys perhaps?