Small problem with Prograsm jr

I have had a similar issue with my Pro Jr. The only thing I can say is: make sure you are using plenty of lube. Also, don't know how else to say this: make sure your bowels are REALLY empty before using the Pro Jr. It seems to me that if they are not, possibly excess pressure builds-up behind the Pro Jr and prevents it from going in all the way. Sometimes, there is no issue at all. Perhaps one of the more senior members will comment please?

Correct me if I'm wrong, but it seems more lube would make it slide out even easier, no? I usually do use plenty, and am apprehensive about using less, because I don't want trouble removing it. Bowels do seem quite empty, as it always comes out clean after a session.

Although the ProJr. is scaled down to about 80% of it's big brother I find that the "scooping" insertion technique for the Progasm is the fastest technique for the ProJr and it seems to insure a complete insertion with snug p-tab and k-tab contact.

Pre-lube your inner sphincter (the valve between the anal canal and your rectum) and apply a good coating of lube on the ProJr.

Insert the 'head' of ProJr. through your outer sphincter and into your anal canal as you would your MGX or Helix. Pause when the tip contacts your inner sphincter and gently tease that sphincter by rocking the tool back and forth until the sphincter is relaxed and loose. Pro Jr. will slide on inward into your rectum. If there is resistance at this point, you might have to rock the tool a bit more to clear the bulge of your prostate. At that point, both the p-tab and k-tab are in close contact with my perineum.

I need another 3 to 5 minutes of relaxed breathing for the walls of my anal canal and rectum to close in on ProJr. and hug it firmly. That "hug" should be automatic and not forced with a clench. At that point, the tabs are well burried in my crack and my impression is that I fitd around ProJr. like a well sized glove. Pro Jr. is not about to slide out on its own. Put another way, it's like I went to Houston and had it fitted just for me.

I have had a similar issue with my Pro Jr. The only thing I can say is: make sure you are using plenty of lube. Also, don't know how else to say this: make sure your bowels are REALLY empty before using the Pro Jr. It seems to me that if they are not, possibly excess pressure builds-up behind the Pro Jr and prevents it from going in all the way. Sometimes, there is no issue at all. Perhaps one of the more senior members will comment please?

I have this issue as well, and its compounded by the problem of bowels getting more during a session — which typically stops it.

Thanks Rook, I'll have to try that method. My guess might be the relaxing after it's in, is something I'm not taking the time to do. DarkEngine: Not sure what you're saying there, can you elaborate a bit?

Let me comment once again. I noted that before a Pro Jr session (forgive the vernacular) but I had a very large BM just prior to the session. The Pro Jr went in very smoothly and stayed in. I'll rest my case!

I have recently acquired a Progasm Jr and have had the same problem of it slipping out at just the wrong moment. I took all the precautions of lubricating it and myself well, inserted it slowly and carefully, and was 100% sure that it was well and truly in with both tabs firmly pressed against my body. I then had a moderately enjoyable session for about 30 minutes, but just as I felt I might be going to hit the big O, out it came, and even after reinsertion did not seem disposed to stay in, so I finished my session with the Helix, which never slips out.

There have also been sessions with the Eupho, when after about an hour's enjoyable ride it suddenly slips out. Maybe my body is trying to tell me that it's had enough.