p-tab on syn not straight

@legace,

I think I would be returning it for a replacement.

too late, snipped the tail off. i`ll see if i can get the p-tab back in line myself.

thanks

If all else fails use a heat gun at about 170C and allow the black silicone to get hot and let the heat penetrate to the inner core. I an guessing there is an inner core. The tab link should be able to be straightened away from the actual tab and then allowed to cool. I have not done this to the p tab link but I have done this to the tail to curl after shortening it. I think it will only work if the red inner core is softened. Keep hands clear of the hot air and don't use a flame. Be careful not to go much hotter as the red plastic may melt. It is of course at your own risk.

If you still have the tail then most often Aneros only want you to send the the tail and the p tab for a refund. Check the conditions