Lube applicator help

what lube are you using? can you just apply more pressure to unstick it?

If you have a pumper, remove the plunger from your applicator. Put your finger and thumb around the gaps in the pumper nozzle and back side of the applicator, and pump it 2~4X, or until the lube is about a 1/2 inch from the tip of the applicator. Work the excess lube into the open end and reinsert the plunger. Now you are ready to go.

Oh, and after each application, use 1-2 squares of T.P. to wipe clean the outside of the applicator before refilling again or washing.

I put the lube in a small cup (I use a small stainless steel measuring cup) and then use the applicator to draw the lubricant into the syringe. DO NOT put the applicator or tip directly into the bottle, this will foster a crossfield contamination which would later result in you injecting mulitiplied bacteria field up into your canal, you don't want to do that, it is unhealthy.