What do you use for your homemade suppository moulds?
Large drinking straws, clip to size desired, tape one end closed, pour in formula, stand mold upright in refrigerator for 15 minutes or so, when solid, warm outside of straw mold with fingers, gently squeeze out the pellet, trim taped eng of pellet to form a nice point, and your done...insert with a little lube in anal canal and enjoy!
Round ice-cube molds. Also have a silicone "spike" ice-cube mold (which looks like the pointed spikes on a spiked collar / armband).
I found an ice cub tray at a dollar store that had rubberized rounded bottoms. You push on the bottom part to push the mould out of the tray. They work pretty nicely.
@00BlueM @musicmaker86
Ice cube tray it is! I've ordered one, should be with me for Saturday. Do you make up a whole tray's worth at a time or just a few cubes?
Many thanks
I melt a mix of shea butter and coconut oil in a pan, then use a large syringe to inject the solution into the round holes in the tray. Have got it down to a science of knowing roughly how much mixture will fill a tray. Then, I leave the tray in the freezer and grab one when needed.
I started out using just shea butter. I find that sticks in the tray when frozen, so to release I put some hot water into the sink and place the tray on top of the water for a moment. Just long enough to soften the bottom of the butter. The 1:1 shea / coconut oil mix doesn't stick.
Found these in the local grocery store hanging on a clip near the kids cereals. I chop the finished sticks into either two or three pieces. That increases the yield to about 20 sessions for a half-pint of melted Coconut Oil.
One chunk for a small tool, two for Max or Progasm and three for really large toys.
http://www.bedbathandbeyond.com/1/1/107144-icy-bottle-sticks-trays-set-of-2.html