Anyone tried Peg Away Putty for mods?

I have used a thermal glue stick to modify the P tab. Once the glue has set you can reheat it with a heat gun or hair dryer to reshape or remove completely.

Having the same irritation from the hard tabs;
Posts from the past suggested using the squeeze bulb from small eyedroppers ($1.99 for 2 at my local drug store) solved this for me. Just slip them over the tab.
Also, have found that the silicone tip of a baby bottle nipple works well too.
Both of these solutions are simple, cheap, reversable, and have the bonus feature of keeping the covered tab from slipping to the side away from the 'sweet spot'.

I hadn't thought about eye droppers. I think I already have a few lying around somewhere.

I use an epoxy putty that is NSF certified to be safe with drinking water and is extremely easy to mold into shape. You just have to know what you want to do before you commit to it, it bonds in a minute. Once it's fully dried and cured it is solid solid as a rock, and its easy to sand down (just make sure you are in a well ventilated place and not breathing in the dust!). posters here have offered easier solutions. I like this putty because it can be on my skin once it's set for hours and there's no irritation or problems! I actually started achieving real prostate Os and super Os more frequently and easily once I mod'd some of my Aneros. I have several I still need to get to!

Interesting topic, can I ask a question? Do you find that that can help the P-tab stay in place better? Are there any other modifications that would help the P-tab stay in place better? I tend to leak a lot of lube and have found in the past that it's hard to get the thing to dig in.

I tried the eye-dropper bulb trick, and that helps a lot.

Interesting topic, can I ask a question? Do you find that that can help the P-tab stay in place better? Are there any other modifications that would help the P-tab stay in place better? I tend to leak a lot of lube and have found in the past that it's hard to get the thing to dig in.

My mods for sure make the toy stay in place and especially centered. My perineum is sort of "dome shaped" in the past the toys would roll to either side and lodge in the crux next to my leg, so the toy sat a little sideways. Once I started to add a little pad of this putty stuff to the P-tab the toys stay in place perfectly and its a permanent mod and I never ever worry about it again. I did the mod on my MGX I think 4 or 5 years ago and its just like the day I did it, and I've used my MGX a LOT since then. I have taken the handles off most my standard Aneros toys, they used to really annoy me and get in the way or feel a little irritating, but since then I've learned to love love the Trident series and I'm past that annoyance of the handles so now I leave them on. With the handles the toys stay more centered than without the handle, but not as perfect as a putty mod to the P-tab.

@techpump just to clarify -- what material did you use? The stuff that's in the original post's link? Or something else... Thanks!

@techpump just to clarify -- what material did you use? The stuff that's in the original post's link? Or something else... Thanks!

@Flesh_Joe it's called PC-Plumbing (and Fix Your Things is a part of the label) and it's an epoxy putty. 1 minute mix time, 3 minutes work time, 60 minutes cure time. I forgot to say it can be sanded down and smoothed or shaped quite easily too. If you use it on Aneros you just need to really abrade or roughen up the spots you want to stick this putty to, makes for better contact.

Thanks @techpump Awesome. Heading to HD 🙂

Thanks for the ideas, I hope to try some of them soon.