Being pegged by you...
 
Notifications
Clear all

Being pegged by your own cock?!


Avatar for Author
(@techpump)
Noble Member Customer
Joined: 6 years ago
Posts: 737
Topic starter  

Hi everyone! Been a while since I posted on this forum or really any here on Aneros, so I figured its time to add this amazing new experience to the Couples Corner:

In the long quest to create a 1:1 copy of my own cock, I finally, after trying off and on since 2006, made a perfect 1:1 clone of my erection a month ago. My wife of course helped 🙂  Its a perfect copy, its amazing. It is quite fun to be with my copy, it is fun to play with it orally and of course, in my own body.

I made a partial copy this spring but it wasn't perfect and does not reflect my true full size. My wife and I played with this smaller less perfect clone earlier this year and she pegged me with it. As she wore it she said to me "now try to deepthroat yourself" and I did with ease, a bit embarrassed to do it, but she got off hard as she watched me devour myself, and then had to fuck me with myself as she watched me (my copy as she wore it) dive in and out of my ass. It is fucking surreal and just beyond belief to do this!!

Its been fun off and on but now with a perfect copy of myself I can really feel exactly what my cock is like and what it can do to my ass. Never in a million years could I have imagined how 'perfect' my own cock feels inside of my ass. To feel it run across my prostate is different from any of the several realistic dildos I have or any other toy I've used for over 20 years during anal and prostate play.

Just having myself in me fully gets me to have orgasms. These Os are different from any I've ever had, though. They are deeper than my already deep prostate and anal orgasms. They are like 'super Os' but different in intensity and origin. It doesn't even move inside me much and the sensations are beyond belief.

Last night my wife finally wore my new copy and she held it while attached to her and she almost came from just wearing it and looking at it and its size against her tiny little body, and I sucked it like crazy and then she fucked me with myself. She came buckets from literally no actual touch of her pussy. I had monumental deep Os. Then I got on top and rode myself very slowly and just enjoyed the feeling of being full knowing it was my own cock filling me up. We got me hard and I came loads on top of her as I was buried deep inside myself. Cum just all the fuck over her body, so much jizz. What a totally fulfilling O and Super T and Super O combined 😉

My question to the trekkers here is have you ever done this before? Has anyone who has a pegging-friendly relationship made a mold of their own cock to receive themselves anally? Or to get your loving partner to wear you like its their own cock and have fun with it? I'd love to know because this phenomenon is not unique to me I'm not the only perv out there to indulge in such wild ass pleasures. It is FUN beyond my wildest imagination for sure!


   
Quote
Avatar for Author
(@pablito1963)
Member Adventurer
Joined: 2 years ago
Posts: 88
 

Intriguing and kind of hot! 


   
techpump reacted
ReplyQuote
Avatar for Author
(@divine_o)
Noble Member Customer
Joined: 5 years ago
Posts: 904
 

Awesome. You’re a lucky couple 🙂 no I’ve never done that! Care to share how? 


   
techpump reacted
ReplyQuote
Studmouse47
(@studmouse47)
Member Adventurer
Joined: 6 years ago
Posts: 67
 

Just curious, how did you make the clone of you cock?  3-D printer? It would be nice if you could detail the procedure that was used to copy it. What material is the clone made of? Is it rigid or flexible?  It would make a great how to video. 


   
techpump reacted
ReplyQuote
Avatar for Author
(@techpump)
Noble Member Customer
Joined: 6 years ago
Posts: 737
Topic starter  

@studmouse47 I used part of the Clone-A-Willy kit and used my own supplies. I buy alginate super cheap on amazon to use as mold material. It changes color as it tells you its fully mixed and then when its curing and fully cured. Just easier to use the dentist stuff 😉  I use Dragon Skin 10 and 10nv as my dildo material. The stuff CAW gives in their kit is very hard and not forgiving at all. It makes a damn good copy of your cock though!! The Dragon Skin is a little softer and I use Slacker in it experimentally to make it a little "squishy" its hard to explain what Slacker does to the silicone rubber, its very neat. 

To be erect I take generic cialis or viagra or levitra, they work like fucking gangbusters. Like I can stand there without touching my shit for over 5 minutes it could hang a chain over it. Of course my wife does the mixing and seducing and it works very well 😉 I've made a few different molds because I'm different levels of erection each time, or there's a slight flaw in the mold process, etc..

I can feel the skin texture that is on my penis when the mold is in my ass, I can't explain what it feels like to have yourself in yourself. Its just fucking out of this world unbelievable and fun and erotic and makes me insanely horny in ways I've never felt before! 


   
Glandrake and Ggringo reacted
ReplyQuote
Faith-Manages
(@faith-manages)
Honorable Member Customer
Joined: 5 years ago
Posts: 417
 

I keep on trying to like your post but it's not allowing me.  I love this idea though I struggle with the progasm and my cock is quite a bit girthier...a bit of a frightening idea honestly...


   
Pablito1963 reacted
ReplyQuote
Avatar for Author
(@techpump)
Noble Member Customer
Joined: 6 years ago
Posts: 737
Topic starter  

@faith-manages it may be hard to at first manage, but dildo play can lead up to doing yourself with yourself. You just need time and continued work at it. I can't describe how amazing and unreal larger sized dildos feel. When the pressure from size fades its just ultimate pleasure its indescribable. Worth the trying for sure! Progasm is large in ways a dildo is not, its angled and shaped to create pressure on your prostate in ways a dildo does not. Dildos can be more passive in that regard and only stretch your anal sphincters. Now that is a lot don't get me wrong! But, I find dildos that are larger than the Progasm to sometimes feel more comfy, and I find the Progasm to be very comfy in regards to prostate toys. There's a lot of variety out there right now for quite cheap and you can get farther than you think with the gear available, I know it all helped me!


   
Faith-Manages and Tbob reacted
ReplyQuote
The_Bishop
(@the_bishop)
Noble Member Customer
Joined: 6 years ago
Posts: 1094
 

Posted by: @techpump

@studmouse47 I used part of the Clone-A-Willy kit and used my own supplies. I buy alginate super cheap on amazon to use as mold material. It changes color as it tells you its fully mixed and then when its curing and fully cured. Just easier to use the dentist stuff 😉  I use Dragon Skin 10 and 10nv as my dildo material. The stuff CAW gives in their kit is very hard and not forgiving at all. It makes a damn good copy of your cock though!! The Dragon Skin is a little softer and I use Slacker in it experimentally to make it a little "squishy" its hard to explain what Slacker does to the silicone rubber, its very neat. 

To be erect I take generic cialis or viagra or levitra, they work like fucking gangbusters. Like I can stand there without touching my shit for over 5 minutes it could hang a chain over it. Of course my wife does the mixing and seducing and it works very well 😉 I've made a few different molds because I'm different levels of erection each time, or there's a slight flaw in the mold process, etc..

I can feel the skin texture that is on my penis when the mold is in my ass, I can't explain what it feels like to have yourself in yourself. Its just fucking out of this world unbelievable and fun and erotic and makes me insanely horny in ways I've never felt before! 

I've thought about doing this over the years, thank you for sparking my interest again! 

Can you go into further explanation to how you cloned yourself? 

Here is what I gather from your post:

- Use "Clone-a-willy" to make a mold
- Use "Dragon Skin 10" and "Dragon 10 NV" mixed together to make dildo of your penis
- Also add in Smooth-On "Slacker" into the mix to give a flesh feel

Is this correct? Also, can you comment on ratios when mixing? 

 


   
ReplyQuote
Avatar for Author
(@techpump)
Noble Member Customer
Joined: 6 years ago
Posts: 737
Topic starter  

@the_bishop Hey man so sorry for late reply to this! The most important thing was erection quality and my wife's diligence with the mixing and making me aroused; she turned me on in a way I didn't expect from her 🙂 Needless to say, the key is a whisk for mixing, really fast hard mixing, and a superior boner. Take a PDE-5 if you got it, Levitra works amazing for this task.

I used clone-a-willy kit, but got my alginate from another source online. I just weigh the raw powder and mix in the 1 3/4 cups of cold water. What's good is it required tap cold water, not a specific temperature, which makes for less erection stability and also possible lumps in the mix and air bubbles. 

Dragon Skin 10 I like the best. While the 10NV is a faster set, with "less bubbles" I find that the 10 is better. I think mixing the two is not gonna work because of the specific weights and cure times for the NV versus the regular 10. However, I have found the 20 to be even better for less bubbles and I like the texture; I've only cast silly things to test it but will cast myself in it soon. 

And add Slacker sparingly! It can make it a little too stretchy or squishy, which feels amazing AFfffffffffff but it can slip/shoot out during powerful orgasms. I have yet to figure out a true dual density version of myself, but slacker on the outside coating and 20 for the inside would be the bomb. I'm thinking of painting the inside of a mold with the fast setting 10NV with slacker mixed in and then pouring in 20 after the 10NV sets. Painting the silicone onto the interior surface of the mold casting makes for no bubbles at all on the exterior of your clone. You can use a curved object too like a soft and rounded butter knife or small spoon bowl. If you have some length to you you need something a bit longer to use! 

Oh, for ratios of slacker to the 10, I do a mix up to 4oz total for A and B parts. What I do is then add like half an ounce on top and then mix it all up. Hope all this helps!


   
The_Bishop reacted
ReplyQuote
The_Bishop
(@the_bishop)
Noble Member Customer
Joined: 6 years ago
Posts: 1094
 

@techpump Wonderful!! Thank you for the added information! This will go a long way to get them there!


   
techpump reacted
ReplyQuote
Share:
Skip to toolbar