Relatively new user needing exprienced help for progasm use

Rocket, I'm certainly no expert, but here's my take on the Progasm: I pre-lube with roughly from a teaspoon to a tablespoon of Astroglide. I also put a thin coat of Vaseline on the Pro before coating it with either Astroglide or KY. This allows it to easily slide into place and it stays lubed even if I leave it in all night. The Pro somestimes feels like it wants to slide out if I am walking with it inserted, but I've never had any sense of that happening when lying down or when standing in place. Perhaps you in fact do not have it fully inserted. I can't see how it could be angled incorrectly when you insert it as it has to follow the natural curve of your rectum to go in at all. I can feel the K-tab and P-tabs make contact when it is in place. In fact, it seems to "pop" into place and draw itself in further by itself when it goes in all the way. Your description of the K-tab resting on the end of the spine does seems accurate. It sounds to me that maybe a bit more (or slipperier) lube and slightly deeper insertion may be all you need. Hope this helps.

Rocket, one more thought. Because of the size of the Progasm I think it is imperative to perform an enema before using it. This will aid ease of insertion and the ease of movement once it is in place. Enjoy!

Rocketman10,

As I stated in my original review of the Progasm several years ago there is a preferred method of inserting this model for greater comfort. In my initial sessions with this product I determined that the head/tip of the unit was best accommodated by a “scooping” or angling motion versus a straight insertion. Assuming that you are prelubricating and then applying copious amounts of lubricant directly onto the massager this should do the trick. As with all larger fare, going slow is a must.

Enjoy!

BF Mayfield

Thanks for all the help everyone 🙂 will give it a go again 2night , yeah i have been taking it slow and yes I always do an enema