Pre-lube question-g...
 
Notifications
Clear all

Pre-lube question-gctid138671


(@Anonymous)
Joined: 1 second ago
Posts: 0
Topic starter  

I hate to post another question about lube, but the search function sucks, i'll post a new thread.

When using a lube-shooter, with liquid water based lube, is there a recommended depth that it should be injected?

I have been injecting 5ml of KY-jelly (just bought some KY-liquid I will be using soon) and have noticed that after an hour or 2 my Aneros is almost dry when removed. I have been injecting with the lube shooter all the way in.

Am I doing this correctly, or should it be injected at a more shallow depth?



   
Quote
Ggringo
(@ggringo)
Member Adventurer
Joined: 10 years ago
Posts: 966
 

[USER="54633"]busdrvr[/USER] I also use KY liquid and use a seringe loaded with 2.5cc. First, I lube my hole then slowly insert the seringe and once in the anus, I squeeze a little lub and direct my seringe all the way in towards the front (towards the belly button) to empty it. When I pull out my Progasm Ice or Helix Syn after 2 hours, they are still wet. You will see a difference switching to liquid from the jelly. Been there, done that.

I noticed that when I use more than 2.5cc, I'm left uncomfortable in my rectum long after the session ended. I have no leakage from the anus and I can manipulate my toy with ease.

Hope it works for you.



   
ReplyQuote
(@badger)
Prominent Member Customer
Joined: 8 years ago
Posts: 833
 

[USER="54633"]busdrvr[/USER], you only need to inject it in the first inch or so; any deeper, and it won't be utilized. What I do is insert it, and as I inject the lube, I slowly pull it out, careful not to pull it out so far as to inject it on the outside of your rectum.



   
ReplyQuote
(@jaxsun)
Reputable Member Customer
Joined: 8 years ago
Posts: 235
 

For my typical 1-2 hour session I've not needed to inject...I coat the device with thin layer of vasoline, then lube anal canal with latex gloves finger. I push in two or three more generous dabs of Slippery Stuff Gel with my finger and insert Aneros. I have found that over lubing with syringe leaves discomfort after the session for me...If my session goes longer I re-lube with finger.



   
ReplyQuote
(@techpump)
Noble Member Customer
Joined: 8 years ago
Posts: 795
 

I lube my finger and insert, work it in and out a few times, then wet my finger and do it again. I like to fuck my ass with my finger pretty good in the very beginning of a session, make contact with my prostate, and just feel how "hungry" my ass is for something to be in it. I squat on the ground, gives me perfect access and I can get in deep that way.

Oh, I use an enema bulb before 99% of all sessions, just to rinse out and be completely clean. I never ever have problems with a "mess" during sessions from doing this. The water and my water-based gel lube work like magic together, and after I use one-three different toys in a session, I'll coat a toy with lube, and reinsert, and then if I'm using a big dildo or toy I'll relube that thing too. But I keep a plastic drink bottle with the top half cut off by my side full of hot water to keep all my Aneros and other toys in so they stay warm. I HIGHLY recommend this if you all use water-based lubes it will transform your sessions if you don't do this already! I dip toys in the water really fast to just get them barely wet and they slip right into me upon insertion. By the time I'm 20+ minutes in, I don't need to use lube at all anymore, everything is so slick it's pretty amazing 🙂



   
ReplyQuote
Share: